谁说天鹅就得低眉顺眼啊！我家天鹅这是扬眉吐气

嘿嘿，构思谈不上，实际上是脖子的那个大弯太难弄了，所以就偷工减料了一些

我是把A4裁成八分，所以一张A4可以作八个小角。作出来的成品有20公分高左右。有
一次在一个卖首饰的商店的橱窗里看到一对有半米高的，估计就是用整张A4做的。

遵命！以下是详细作法。

做小角

一个做好了，只用再做499个了

组装身体

You will need three triangles to make one basic piece for the body. Follow the picture by connecting only one leg of 1 and 2 with a third triangle.

Build 30 basic pieces by following rule 1. Connect these pieces to create a circular base.

Add 3 more rings from the outer layer and turn the whole body upside down. The five connected layers will look like a stadium when you are looking at it from the top.

我发现在做最开始的一两圈的时候用些胶水固定可以容易些。不过缺点是如果犯了错
误就没法纠正了，相关小角就浪费掉了。

翅膀和尾巴

Wings:
The sixth ring is the foundation for the two wings. You will build up a pyramid on each side by decreasing the triangular pieces by one. The 7th ring will have 12 on each side, totaling to 24. The 8th ring will have 11 on each side, totaling to 22. The 9th ring will have 10 pieces on each side, totaling to 20...The 16th ring will have 3 pieces on each side, totaling to 6. The 17th ring will have 2 pieces on each side, totaling to 4. The 18th ring will have 1 piece on each side totaling to 2. The wings should look like the yellow parts on the left picture.

Tail:
The yellow portion is going to be the tail. Start from the 6th ring, where we skipped two spaces on each side. Pick one side and add on two pieces. The 7th ring will have three triangles. The 8th ring will have 4 pieces. The 9th ring will have 3 pieces. The 10th ring will have 2 pieces. The 11th ring will have a single piece, which will be the end of the tail.

Pay attention when you are adding on the 6th ring. Add on 13 pieces and skip 2 spaces (the 2 spaces are equal to four skipped legs of the triangle). Continue to add on the rest of the 13 triangles. You will have 2 spaces on each opposite side, where you will connect the swan's neck on one and the tail on the other.

脖子和基座

The Head and Neck...
30 triangular pieces are required for the neck and head. Follow the picture to connect them lengthwise. Don't use the glue right away or you will not attain the smooth, s-shape. Glue the tips at one end together (the beak).

The Base...

You need 35 triangular pieces for the upper base and 45 for the lower base. Put the upper base on top of the lower one.

Add the swan's neck onto the body (into the 2 spaces you skipped from skip 6). Set the swan on top of the base you made in step 8. Congratulations! The swan is complete.
You may choose to put a crown on top of the swan’s head, if you would like to embellish it a little further.